Offset cams are driving me nucking futz. Out of the 7 games I have, only two came with a full/correct set of cams for all of the locks. Problem is, I can't find the correct offset cams for the remaining locks. For example, my TRON that has a correct set has a 7/8" lock for the back with an ~ 1/2" offset. See below:
![]()
It needs that long cam and offset to compensate for the plate/screws that prevents the whole lock mechanism from turning.
The coin door lock is 5/8" with an ~ 1/2" "bent" offset. This setup works, but it's very tight (I can feel it rubbing the metal stop when turning the lock).
![]()
Where can I get extras of these (and a more correct non bent cam with a step 1/2" offset)? I don't think Bob Roberts sells 1/2" offset cams and the largest offset on the Happ site is 3/8". The cam length on the TRON back door is 2". If I use a straight cam on a 7/8" back door lock it won't work because it'll get hung up on the screw. If I use a straight cam on a 1 1/8" lock, there's too much slop in the door.
Finally, I need this kind of lock for a separate lock box. I'm not really sure what it's called.
![]()
It needs that long cam and offset to compensate for the plate/screws that prevents the whole lock mechanism from turning.
The coin door lock is 5/8" with an ~ 1/2" "bent" offset. This setup works, but it's very tight (I can feel it rubbing the metal stop when turning the lock).
Where can I get extras of these (and a more correct non bent cam with a step 1/2" offset)? I don't think Bob Roberts sells 1/2" offset cams and the largest offset on the Happ site is 3/8". The cam length on the TRON back door is 2". If I use a straight cam on a 7/8" back door lock it won't work because it'll get hung up on the screw. If I use a straight cam on a 1 1/8" lock, there's too much slop in the door.
Finally, I need this kind of lock for a separate lock box. I'm not really sure what it's called.
